Your cart is currently empty!
그리고 DumpTOP HPE6-A85 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1HzJP9bTi4ClhP-RTsOITKm6OnfuKafiL
HP인증 HPE6-A85덤프로HP시험을 패스,하지 못하셨다구요? 최선을 다했는데도 실패하였다는 말은 영원히 하지마세요. HP인증 HPE6-A85시험을 패스하는 방법은 많고도 많습니다. DumpTOP의HP인증 HPE6-A85덤프로 시험에 다시 도전해보세요. DumpTOP의HP인증 HPE6-A85덤프는 착한 가격에 100%에 달하는 적중율과 패스율을 보장해드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용을 환불처리해드립니다. DumpTOP의HP인증 HPE6-A85덤프로 시험패스를 꿈꿔보세요.
HP HPE6-A85 인증은 전 세계적으로 인정되며 IT 산업의 고용주가 높이 평가합니다. 인증은 Aruba 무선 네트워크에 대한 깊은 이해와 이러한 네트워크를 설계, 구현 및 문제 해결하는 기능을 보여줍니다. IT 전문가가 경력을 발전시키고 수입 잠재력을 높이는 훌륭한 방법입니다.
시험은 60 개의 객관식 질문으로 구성되며 시간 제한은 90 분입니다. 시험의 합격 점수는 75%입니다. 시험은 영어, 단순화 된 중국어, 일본어 및 독일어를 포함한 여러 언어로 제공됩니다. 시험 수수료는 국가에서 사용되는 위치와 통화에 따라 다릅니다.
DumpTOP 에서 제공해드리는 HP HPE6-A85덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 HP HPE6-A85 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히HP HPE6-A85시험을 패스할 수 있도록 최선을 다하고 있습니다.
HP HPE6-A85 시험은 Aruba Campus Access Associate에 필요한 지식과 기술에 중점을 둔 인증 시험입니다. 이 시험은 Aruba 네트워킹 기술과 개념, 무선 LAN, 모빌리티, 보안 및 유선 인프라 등을 이해하는 지식을 시험하기 위해 설계되었습니다.
질문 # 100
What are the main characteristics of the 6 GHz band?
정답：C
설명：
The main characteristic of the 6 GHz band that is true among the given options is that in North America, the 6 GHz band offers more 80 MHz channels than there are 40 MHz channels in the 5 GHz band. This characteristic provides more spectrum availability, less interference, and higher throughput for wireless devices that support Wi-Fi 6E Wi-Fi Enhanced (Wi-Fi 6E) is an extension of Wi-Fi 6 (802.11ax) standard that operates in the newly available unlicensed frequency spectrum around 6 GHz in addition to existing bands below it. Some facts about this characteristic are:
In North America, there are up to seven non-overlapping channels available in each of three channel widths (20 MHz, 40 MHz, and 80 MHz) in the entire unlicensed portion of the new spectrum (5925-7125 MHz). This means there are up to 21 non-overlapping channels available for Wi-Fi devices in total.
In comparison, in North America, there are only nine non-overlapping channels available in each of two channel widths (20 MHz and 40 MHz) in the entire unlicensed portion of the existing spectrum below it (2400-2483 MHz and 5150-5825 MHz). This means there are only up to nine non-overlapping channels available for Wi-Fi devices in total.
Therefore, in North America, there are more than twice as many non-overlapping channels available in each channel width in the new spectrum than in the existing spectrum below it.
Specifically, there are more than twice as many non-overlapping channels available at 80 MHz width (seven) than at 40 MHz width (three) in the existing spectrum below it.
The other options are not true because:
Less RF signal is absorbed by objects in a 6 GHz WLAN: This option is false because higher frequency signals tend to be more absorbed by objects than lower frequency signals due to higher attenuation Attenuation is a general term that refers to any reduction in signal strength during transmission over distance or through an object or medium . Therefore, RF signals in a 6 GHz WLAN would be more absorbed by objects than RF signals in a lower frequency WLAN.
The 6 GHz band is fully backward compatible with existing bands: This option is false because Wi-Fi devices need to support Wi-Fi 6E standard to operate in the new spectrum around 6 GHz . Existing Wi-Fi devices that do not support Wi-Fi 6E standard cannot use this spectrum and can only operate in existing bands below it.
Low Power Devices are allowed for indoor and outdoor usage: This option is false because Low Power Indoor Devices (LPI) are only allowed for indoor usage under certain power limits and registration requirements . Outdoor usage of LPI devices is prohibited by regulatory authorities such as FCC Federal Communications Commission (FCC) is an independent agency of United States government that regulates communications by radio, television, wire, satellite, and cable across United States . However, outdoor usage of Very Low Power Devices (VLP) may be allowed under certain power limits and without registration requirements.
질문 # 101
When measuring signal strength, dBm is commonly used and 0 dBm corresponds to 1 mW power.
What does -20 dBm correspond to?
정답：B
설명：
dBm is a unit of power that measures the ratio of a given power level to 1 mW. The formula to convert dBm to mW is: P(mW) = 1mW * 10
참고: DumpTOP에서 Google Drive로 공유하는 무료, 최신 HPE6-A85 시험 문제집이 있습니다: https://drive.google.com/open?id=1HzJP9bTi4ClhP-RTsOITKm6OnfuKafiL